(see AN-1530)

(see AN-1533)

(see AN-1548)

(see AN-1561)

(see AN-1527)

(see AN-1726)

ADSP-BF537 EZ-KIT Lite Evaluation platform

The ADSP-BF537 features:

• Up to 600MHz High Performance Blackfin processor
• 132KB of on chip full speed SRAM
• 10-stage RISC MCU/DSP pipeline with mixed 16-/32-bit ISA for optimal code density
• Powerful and flexible cache architecture suitable for soft real-time control tasks and industry-standard operating systems, plus hard real-time signal processing
• Full SIMD architecture, including instructions for accelerated video and image processing
• Embedded IEEE 802.3 Compliant 10/100 Ethernet MAC with buffered oscillator output to a separate PHY
• Controller Area Network (CAN) 2.0B interface
• Two-Wire Interface Controller
• Glueless Video Capture/Display Port

Micrium has one project targeted to this board. The project corresponding to AN-1530 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page.

ADSP-BF533 EZ-KIT Lite Evaluation platform

The ADSP-BF533 features:

• Up to 756 MHz performance
• 1512 MMACs/second
• Application-tuned peripherals provide glueless connectivity to general-purpose converters in data acquisition applications
• Large on-chip SRAM for maximum system performance

Micrium has one project targeted to this board. The project corresponding to AN-1533 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page.

ADSP-BF548 EZ-KIT Lite Evaluation platform

The ADSP-BF548 features:

• Blackfin® Processor Core with up to 600Mhz (1200 MMACS) performance
• Lockbox™ Secure Technology: Hardware-enabled security for code and content protection.
• Two independent DMA controllers
• Multimedia: Multiple Enhanced Parallel Peripheral Interfaces (EPPI), Pixel Compositor hardware accelerator
• Human Interface: 18/24-bit LCD Controller 32-bit Up/Down counter / Thumbwheel interface, 8x8 Keypad interface
• Connectivity: High Speed USB OTG , Host DMA, UARTs, SPORTs, SPI, TWI, and CAN
• Expansion: SD/SDIO and ATAPI-6 Controllers
• Synchronous memory interface for DDR / Mobile DDR connectivity
• Asynchronous memory interface for SRAM, EEPROM, NAND/NOR, Flash connectivity

Micrium has one project targeted to this board. The project corresponding to AN-1548 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page.

ADSP-BF527 EZ-KIT Lite Evaluation platform

The ADSP-BF527 features:

• Lockbox™ Secure Technology: Hardware-enabled security for code and content protection.
• Blackfin Processor Core with up to 600 MHz (1200 MMACS) performance
• 2 dual-channel, full-duplex synchronous serial ports supporting 8 stereo I2S channels
• 12 peripheral DMA channels supporting one- and two-dimensional data transfers
• NAND Flash Controller with 8-Bit interface for commands, addresses and data.
• Connectivity: HS USB 2.0 OTG, Host DMA Port, UART’s, SPORT’s, SPI and TWI.
• Ethernet 10/100 MII interface
• Memory controller providing glue-less connection to multiple banks of external SDRAM, SRAM, Flash, or ROM
• 289-ball, 12x12 mm, 0.5 mm pitch mini-BGA (Commercial temperature range 0°C to +70°C)
• 208-ball, 17x17 mm, 0.8 mm pitch mini-BGA (Commercial temperature range 0°C to +70°C; Industrial temperature range -40°C to +85°C*)
* 533 MHz max operating speed

Micrium has one project targeted to this board. The project corresponding to AN-1527 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page.

ADSP-BF561 EZ-KIT Lite Evaluation platform

The ADSP-BF561 features:

• Dual Blackfin cores with each core capable of 600 MHz/1200 MMACs (2400 MMACs total) for demanding signal processing applications.
• Large On-Chip Memory of 328 KBytes – arranged as individual L1 memory systems for each core plus a shared L2 memory space.
• High data throughput tailored for the needs of imaging and consumer multimedia applications.
• Application Tuned Peripherals provide glueless connectivity to a variety of audio/video converters and general-purpose ADCs/DACs.

Micrium has one project targeted to this board for a single Core configuration. The project corresponding to AN-1561 uses µC/OS-II and µC/Probe. The user LEDs blink, controlled by push button switches or by a given delay. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page.

ADuC7026 Evaluation Board

The ADuC7026 Development Board includes

• Analog Devices ADuC7026 (ARM7) MCU
• Demo circuit with potentiomter and LED
• User LED
• User push button
• Serial (RS-232) interface
• Reset button

Micrium has one project targeted to this board. The project corresponding to AN-1726 uses µC/OS-II and µC/Probe. The user LED and DAC output LED (in the demo circuit) blink, controlled by the potentiometer and push button, respectively. µC/Probe can be used to monitor global variables in the application via the board's serial (RS-232) interface. To download a trial version of µC/Probe, please visit the this page.