Cambridge Consultants

You are here : Micrium : Cambridge Consultants

µC/OS-II ports Application notes Evaluation Boards µC/FS ports µC/TCP-IP ports uC/USB ports

XAP ASIC processors : XAP4 16-bit 64kB XAP5 16-bit 16MB XAP3 32-bit 4GB

Datasheet

This is a port of uC/OS-II to the Cambridge Consultants family of XAP processors :

This is a family of RISC processors, optimised for embedded use in ASICs and FPGAs. They are available as synthesisable cores in Verilog RTL. All three processors have been designed as a family with very similar features :

• RISC, Load-Store architecture.
  
• Von Neumann memory (single memory bus), with support for unaligned memory accesses.
  
• Fast Interrupts.
  
• Very high code density (leading to low power, low cost and fast execution).
  
• SIF debug interface (non-invasive debug while processor is running).
  
• GNU compile chain (GCC and Binutils).
  
• xIDE software toolkit with interfaces to software instruction simulator and hardware targets (via SIF).
  

You can download the xIDE and GNU software tools for XAP processors from www.CambridgeConsultants.com/ASIC.
After you have installed these tools on your Windows PC, you should send your Hostid to xap@cambridgeconsultants.com for a licence.

µC/OS-II ports

All µC/OS ports can easily be ported to µC/OS-II. If you port µC/OS-II to a processor not listed and want to include your port on this web site, please contact Micrium at Jean.Labrosse@Micrium.com. Note that the ports are provided as is with the exeption of the Micrium ports which are supported by Micrium.

Note that only the PORT is provided and it is assumed that you have the rest of the source for µC/OS-II from the book or the upgrade.

Download	Processor	OS version	Compiler	Contributor
	XAP3		GCC	Cambridge Consultants
	XAP4		GCC	Cambridge Consultants
	XAP5		GCC	Cambridge Consultants

Application notes

Evaluation boards

µC/FS ports

µC/TCP-IP ports

µC/USB ports

© www.Micrium.com