NXP - LPC31xx - Micrium Manufacturer ports and information

NXP - LPC31xx

You are here : Micrium : NXP - LPC31xx

µC/OS-II ports

All µC/OS ports can easily be ported to µC/OS-II. If you port µC/OS-II to a processor not listed and want to include your port on this web site, please contact Micrium at Micrium. Note that the ports are provided as is with the exeption of the Micrium ports which are supported by Micrium.

Note that in most cases only the PORT is provided and it is assumed that you have the rest of the source for µC/OS-II from the book or the upgrade. In cases where the µC/OS-II source code is included, you will need to be a registered member and be logged in before you can download the file.

Download

Processor

OS version

Compiler

Contributor

LPC3180
(Nohau LPC3180 Evaluation Board)

V2.83

IAR

LPC3180
(Phytec LPC3180 Evaluation Board)

V2.85

IAR

Rowley

Application notes

AN Number	Title	Author	Download
AN-1011	µC/OS-II and the ARM processor
AN-1012	µC/OS-II and the ARM7 in Thumb mode
AN-1014	µC/OS-II for ARM Processors Works in ARM or Thumb mode
AN-1180	µC/OS-II and the NXP LPC3180 Processor on the Nohau LPC3180 Evaluation Board

Evaluation boards

Board

Description

Download

Nohau LPC3180 Evaluation Board

Example µC/OS-II-based IAR projects are available for the LPC 3180 board which employs NXP's LPC3180 processor. Micrium has one project targeted to this board. The project corresponding to AN-1180 and uses µC/OS-II and µC/OS-View.

AN-1180

Phytec LPC3180 Evaluation Board

Example µC/OS-II-based IAR and Rowley projects are available for the Phytec LPC3180 board which employs NXP's LPC3180 processor. The peripherals on this board include two RS-232 ports, a USB host port, a USB device port, a USB OTG port and a SD/MMC card slot. The user interface includes 2 user push buttons, four LEDs and a potentiometer.

Micrium has one project targeted to this board. The project uses µC/OS-II and µC/Probe. The push buttons control text output on one RS-232 port, the LEDs blink and µC/Probe can be used to monitor global variables in the application via the board's other RS-232 port. To download a trial version of µC/Probe, please visit the this page. This project also uses the LPC3180's Vector Floating Point (VFP) unit.

µC/FS ports

µC/TCP-IP ports

µC/USB ports