µC/GUI LCD13700 Driver
You are here : Micrium
: Products : µC/GUI :
LCD13700 Driver
Supported controllers
This driver has been tested with the following LCD controllers:
- Epson S1D13700 controller
Bits per pixel
The supported color depth is 2 bpp.
Interfaces
8-bit parallel (simple bus) bus interfaces is supported.
Display data RAM organization
The picture above shows the relation between the display memory and the SEG and COM lines of the display.
Additional RAM requirements of the driver
This driver can be used with or without a display data cache. The data cache contains
a complete copy of the contents of the display data RAM. If a cache is not used, there
are no additional RAM requirements.
It is recommended to use this driver with a data cache for faster display RAM access.
Not using a cache degrades the performance of this driver. The amount of memory
used by the cache can be calculated as follows:
Size of RAM (in bytes) = ((LCD_XSIZE * LCD_BITSPERPIXEL + 7) / 8) * LCD_YSIZE
Additional driver functions
None.
Hardware configuration
This driver accesses the hardware with a simple bus interface. The following table lists the macros which must be defined for hardware access:
| Macro |
Description |
| LCD_INIT_CONTROLLER |
Initialization sequence for the LCD controller. |
| LCD_READ_A1 |
Reads a word from display controller with A-line high. |
| LCD_WRITEM_A1 |
Writes multiple words to display controller with A-line high. |
| LCD_WRITE_A0 |
Writes a word to display controller with A-line low. |
| LCD_WRITE_A1 |
Writes a word to display controller with A-line high. |
Additional configuration switches
| Macro |
Description |
| LCD_CACHE |
When set to 0, no display data cache is used, which slows down the speed of the driver. Default is 1 (cache activated). |
Special requirements for certain LCD controllers
None.
|
