ST Microelectronics - STM32
You are here : Micrium : ST Microelectronics - STM32
µC/OS-II ports
All µC/OS ports can easily be ported to µC/OS-II. If you port µC/OS-II to a processor not listed and want to include your port on this web site, please contact Micrium at Micrium. Note that the ports are provided as is with the exeption of the Micrium ports which are supported by Micrium.
Note that in most cases only the PORT is provided and it is assumed that you have the rest of the source for µC/OS-II from the book or the upgrade. In cases where the µC/OS-II source code is included, you will need to be a registered member and be logged in before you can download the file.
| Download |
Processor |
OS version |
Compiler |
Contributor |
see STM3210B-EVAL
see STM32-SK
|
STM32 (Cortex-M3) |
V2.86 |
IAR
&
ARM/Keil |
 |
Application notes
| AN Number |
Title |
Author |
Download |
| AN-1018 |
µC/OS-II and the ARM Cortex-M3 Processors
|
|
|
| AN-1320 |
µC/OS-II, µC/Probe and the STMicroelectronics STM32
(STMicroelectronics STM3210B-EVAL &
IAR STM32-SK ) |
|
|
Evaluation boards
| Board |
Description |
Download |
|
STMicroelectronics STM3210B-EVAL
Evaluation Board
Example µC/OS-II-based IAR EW and Keil µVision3 (RV-MDK) projects are available for the STM3210B-EVAL evaluation board, which uses the STM32 (Cortex-M3) CPU from STMicroelectronics. The evaluation board contains a 240x320-pixel LCD display, 4 LEDs, three user push buttons, a potentiometer, a miniSD card holder, two RS-232 ports, one CAN port, and a USB device port. The MCU can be programmed through the board's 20-pin J-TAG port.
Micrium has one project targeted to this board. The project corresponding to AN-1320 uses µC/OS-II and µC/Probe. The push buttons control the message displayed on the LCD and µC/Probe can be used to monitor global variables in the application via one of the board's RS-232 ports. To download a trial version of µC/Probe, please visit the this page.
|
AN-1320
|
|
IAR STM32-SK Evaluation Board
Example µC/OS-II-based IAR EW projects are available for the IAR STM32-SK evaluation board, which uses the STM32 (Cortex-M3) CPU from STMicroelectronics. The evaluation board contains a 2- x 16-character LCD display, up to 16 LEDs (depending on hardware configuration), three user push buttons, a potentiometer, a SD card holder, two RS-232 ports, one CAN port, and a USB device port. The MCU can be programmed through the board's 20-pin J-TAG port.
Micrium has one project targeted to this board. The project corresponding to AN-1320 uses µC/OS-II and µC/Probe. The push buttons control the message displayed on the LCD and µC/Probe can be used to monitor global variables in the application via one of the board's RS-232 ports. To download a trial version of µC/Probe, please visit the this page.
|
AN-1320
|
µC/FS ports
µC/TCP-IP ports
µC/USB ports
© www.Micrium.com |
